Mechanical and physical properties

Stainless steels are often rightly associated with corrosion resistance… but they can do much more.

Non-corrosion properties of stainless steels

Stainless steels are often rightly associated with corrosion resistance… but they can do much more! The examples in this document illustrate the usefulness of other properties of stainless steel long products.

Download this document
Tables of technical properties of stainless steels (flat products)

The selection of the appropriate stainless steel grade for each application is the result of various considerations. In order to assist you in this selection, Euro Inox mad the following technical information available:

  • Chemical composition of stainless steels (flat products)
  • Physical properties of stainless steels
  • Mechanical properties of stainless steels (flat products)
Download the tables here
Magnetic properties of stainless steel

The magnetic attraction of ‘ferromagnetic’ ferritic martensitic and duplex stainless steels is compared to that of the low magnetic permeability austenitic types. Hard and soft ferromagnetic types are compared.
Source: British Stainless Steel Association

Download the paper here
High temperature resistance of stainless steel

Stainless steels are most commonly used for their corrosion resistance. The second most common reason stainless steels are used is for their high temperature properties; stainless steels can be found in applications where high temperature oxidation resistance is necessary, and in other applications where high temperature strength is required.
Source: AZO Materials

Read more here
Stainless steel property database

This section of the Hendrix Group site provided a series of articles on the properties, forms and uses of stainless steels.

See the articles here
Stainless steel for machining

Describes the standard grades of stainless steel that have been specially designed to improve machinability, including types 203, 303, 430F, 416 and 429F.
Source: Specialty Industry of North America

Open this document
Typical chemical and physical properties of stainless steel

Chemical, physical and mechanical properties of stainless steels: 304 (austenitic), 430 (ferritic), 410 (martensitic).
Source: Specialty Steel Industry of North America

See the properties here
Note on the sensitivity of stainless steel to strain rate

There is a growing interest for stainless steels in structural automotive applications. As a consequence, more questions are raised regarding the sensitivity of stainless steels to strain rate. This document attempts to summarize the published results for strain rates from 0,2 to 10%.
Source: Outokumpu

Download this paper
Fatigue properties of stainless steel lap joints

Spot welded, adhesive bonded, weldbonded, laser welded and clinched joints of stainless steel sheets - a review of their fatigue properties.
Source: Outokumpu

Download this document
General properties of steels

A table lists the typical properties of steels, including stainless steels at room temperature (25°C). The wide ranges of ultimate tensile strength, yield strength, and hardness are largely due to different heat treatment conditions.
Source: engineering Fundamentals

See the table here
International Stainless Steel Forum (ISSF)
Avenue de Tervueren 270
1150 Brussels, Belgium
T: +32 2 702 89 00
Follow us on:
Designed by